fbpx

Shop

Driveshaft and Hub Removal Kit

AUD $2,645.93

Hub Removal Kit for easy removal of hubs.

SKU: QCP HR-K-P-1 Categories: ,

Description

FEATURES

  • A complete range of attachments and accessories to remove hubs and CV shafts from hubs.
  • Adjustable to suit most wheel hubs.
  • Remove hubs on vehicle.
  • A combination of 5T and 12T hub attachments used for the removal of driveshafts/CV shafts/half shafts on front wheel drive, all wheel drive, rear wheel drive and 4WD cars and trucks with independent suspensions.
  • Attachments are designed to use the vehicles wheel nuts and bolts, ensuring that all fasteners are used and minimising the risk of damaging threads because of using the wrong nuts and bolts.
  • These attachments ensure that the removal force is applied directly and squarely, maximising the removal effort.
  • Suitable for the following bolt patterns:
    • 4×98-100-108-114.3
    • 5×98-100-105-108-112-114.3-115-120-120.65-127-130-139.7-150
    • 3-115-120-127-130-139.7
  • These are PRO series attachments and are coated with nickel for corrosion protection
  • The hub removal attachment can only be used with 5T cylinders or cylinders fitted with 5T couplings. It cannot be used with 12T cylinders or couplings.
  • All 5T hub attachments in this kit can be used with 5T and 12T cylinders and couplings.
  • All 12T hub attachments can be used with 5T, 12T and 25T cylinders and couplings.

CONTENTS

  • 1 x 5T Driveshaft Hub Attachment 4×98, 4×100, 4×108 and 4×114.3 drillings p/n QCP DS140 4×98-100-108-114.3-P
  • 1 x 5T Driveshaft Hub Attachment 5×98, 5×100 and 5×105 drillings p/n QCP DS140 5×98-100-105-P
  • 1 x 5T Driveshaft Hub Attachment 5×108, 5×112 and 5×114.3 drillings p/n QCP DS140 5×108-112-114.3-P
  • 1 x 5T Driveshaft Hub Attachment 5×115, 5×120 and 5×120.65 drillings p/n QCP DS150 5X115-120-120.65-P
  • 1 x 5T Driveshaft Hub Attachment 6×114.3, 6×115 and 6×120 drillings p/n QCP DS150 6×114.3-115-120-P
  • 1 x 12T Driveshaft Hub Attachment 6×127, 6×130 and 6×139.7 drillings p/n QCP DS168 6×127-130-139.7-P
  • 1 x 12T Driveshaft Hub Attachment 5×130, 5×139.7 and 5×150 drillings p/n QCP DS176 5×130-139.7-150-P
  • 1 x 5T Driveshaft Hub Attachment 5×100 and 5×112 drillings p/n QCP DS140 5X100-112-E
  • 1 x 5T Driveshaft Hub Attachment 5×114.3 and 5×120 drillings p/n QCP DS150 5X114.3-120-E
  • 1 x 12T Driveshaft Hub Attachment 6×130 and 6×139.7 drillings p/n QCP DS168 6X130-139.7-E
  • 1 x 12T Driveshaft Hub Attachment 5×130 and 5×150 drillings p/n QCP DS176 5X130-150-E
  • 1 x 5T 300mm long x 16mm slotted bar with coupling p/n QCP 300-2
  • 1 x M16 x 9/16″ Right angle adaptor p/n QCP 45-1
  • 1 x M16 150mm long x 13mm slotted bar p/n QCP 150-2
  • 1 x M16 200mm long x 13mm slotted bar p/n QCP 200-2
  • 1 x Stop p/n QCP S40x27x10
  • 2 x M16 x 70mm cap screws
  • 2 x M16 x 80mm cap screws
  • 2 x M16 x 100mm cap screws
  • 2 x M16 washers
  • 3 x M12 x 65mm cap screw
  • 3 x M12 x 70mm cap screw
  • 3 x M12 x 80mm cap screw
  • 3 x M12 x 90mm cap screw
  • 4 x M12 washers
  • 4 x M12 nuts

HYDRAULIC KIT OPTIONS:

IDEAL

OTHER OPTIONS

Additional information

Weight 25 kg
Dimensions 57 × 43 × 21.5 cm

Reviews

There are no reviews yet.

Be the first to review “Driveshaft and Hub Removal Kit”

Your email address will not be published. Required fields are marked *