25T Pitman Arm Puller Attachment 98mm

AUD $899.00

Not the actual video. This is our smaller 12T 66mm pitman arm attachment with 25T hydraulic cylinder.

5 in stock (can be backordered)

SKU: QCP PA-98-K Categories: ,


25T Pitman Arm Puller Attachment 98mm

This pitman arm attachment is universal and is designed to remove large pitman arms, such as those found on English Buses. The critical dimensions of the attachment are:

  • 98mm wide
  • 77mm high – distance from the back of the pitman arm (gearbox side) to the top of the output shaft of the gearbox
  • 59mm maximum gearbox output shaft diameter
  • 10mm minimum gap between the back of the pitman arm and the gearbox housing

If the width of the pitman arm is less than 80mm it is recommend to use our 12T 80mm pitman arm attachment, which can also be used with the Mechanics Mate 25T hydraulic cylinder with optional 25T+12T reducer.

This pitman arm attachment features out 25T coupling. Ideally it is used with our 25T hydraulic cylinder. If required, it can also be used with our 50T hydraulic cylinder with option 50T-25T reducer. If your require the 50T hydraulic option, you will need to contact us.

As a minimum this kit require the Mechanics Mate 25T hydraulic cylinder only kit. If purchasing the 25T cylinder only kit, you will need to use your own pump. Please note, we only use Cejn quick connect hydraulic couplings, so you may need to convert the hydraulic fittings on your existing pump. We can supply these fittings, or a pump with the correct fittings if required.

This kit contains:

  • 25T 98mm Pitman Arm Attachment
  • Heavy duty transport and storage case

This is a Pro series attachment and has a nickel coating for corrosion protection.



Additional information

Weight 20 kg
Dimensions 47 × 36 × 17.5 cm


There are no reviews yet.

Be the first to review “25T Pitman Arm Puller Attachment 98mm”

Your email address will not be published. Required fields are marked *