10T Cylinder Only Kit

AUD $434.00

10T Cylinder Only Kit is for those who are already using hydraulics and have their own pump, and now want to use the versatility that Mechanics Mate offers with its Quick Change Coupling.

The 10T cylinder with through hole is ideal for removing and installing bushings, bearings and anything else that requires pulling or pushing.


4 in stock

SKU: QCP 10TC-CO-K Categories: ,


This kit is your entry of HYDRAULICS only into the Mechanics Mate Quick Changer Puller World. It is ideally suited to those who already are using hydraulics and want the versatility that the Mechanics Mate quick change coupling and attachments offer. The 10T cylinder can power all the attachments up to and including 12T easily (adaptor not included). With our optional step up adaptors you could attach it to 25T, 50T and 100T attachments, but it is unlikely you will have enough force to do the job. But you never know.

The 10T hydraulic cylinder in this kit is fitted with a 5T quick change coupling and 16mm through hole. Features include:

  • The 5T coupling allows use on all Mechanics Mate 5T attachments.
  • With adaptor p/n QCP 5T-12T-17, not included, can be used on all 12T attachments with little compromise.
  • Except for the QCP RHS120 cylinder, this is the shortest cylinder in the Mechanics Mate range.
  • Through hole is ideal for all pushing and pulling requirements.
  • Up to 16mm (5/8″) threaded rods can pass through the cylinder easily to be used for the installation and removal of bearings, bushings and anything else yo can think of. Mechanics Mate supplies a range of installation shafts for the installation of power steering pulleys and harmonic balancers.
  • 700bar (10,000psi) hydraulc pump is required

Piston ends should always be used to protect the piston of the cylinder. Piston ends are available in many sizes and can vary depending on the application. The piston ends supplied in this kit will cover most applications.

This 10T cylinder only kit comes complete with:

  • 10T Hydraulic cylinder with 20mm(3/4″) stroke and 16mm through hole
  • 25mm diameter piston end
  • 25mm diameter piston extension 18mm long
  • 25mm diameter piston extension 36mm long
  • 25mm diameter piston extension 54mm long
  • 53mm diameter piston end with 17mm hole
  • Storage case


  • This cylinder is fitted with a Cejn hydraulic connector. If you are using your own pump you will need to fit a Cejn coupler to your pump. Mechanics Mate can supply the correct fitting if required.


There are no reviews yet.

Be the first to review “10T Cylinder Only Kit”

Your email address will not be published. Required fields are marked *